Showing 1–48 of 70 results

1/4″ Hydraulic Fitting – 90 degree elbow (6801-04-04)

$15.63

1/4″ Hydraulic Fitting – 90° Elbow (6801-04-04)

113128

JIC-M to ORB-M (Adjustable). Standard in Level Up® Towable, Level Up® Motorized, and LCI® Motorized hydraulic leveling systems

  • For use with 1/4″ diameter hose
  • End 1 – Male JIC 37 Degree Flare
  • End 2 – Male SAE ORB (Adjustable NWO)

1/4″ Hydraulic Fitting – Straight (6400-04-04)

$4.95

1/4″ Hydraulic Fitting – Straight (6400-04-04)

113131

JIC-M to ORB-M (Adjustable). Standard in Level Up® Towable hydraulic leveling systems

  • For use with 1/4″ diameter hose
  • End 1 – Male JIC 37 Degree Flare
  • End 2 – Male SAE ORB (Rigid)

24″ Scissor Jack Kit (Single)

$45.95

24″ Scissor Jack Kit – Single Pack

285325

Lippert Components 24-inch lift stabilizer jacks provide a cost-efficient way to stabilize your RV or trailer. LCI manual stabilizer jacks feature easy bolt-on installation and powder-coated, rust-inhibitive finish. This single stabilizer jack comes with mounting hardware.

  • Heavy gauge steel stabilizer jacks manually raise and lower with crank handle and add stability to RV fifth-wheel or travel trailer
  • 24″ rise
  • Easy bolt-on installation
  • Mounting hardware included

24″ Scissor Jack Kit with Crank Handle (Pair)

$86.95

24″ Scissor Jack Kit – 2 Pack

285326

Lippert Components 24-inch lift stabilizer jacks provide a cost-efficient way to stabilize your RV or trailer. LCI manual stabilizer jacks feature easy bolt-on installation and powder-coated, rust-inhibitive finish. This kit contains two 24-inch stabilizer jacks, mounting hardware and manual crank handle.

  • Heavy gauge steel stabilizer jacks manually raise and lower with crank handle and add stability to RV fifth-wheel or travel trailer
  • 24″ rise
  • Easy bolt-on installation
  • Mounting hardware included

30″ Scissor Jack Kit (Single)

$56.95

30″ Scissor Jack Kit – Single Pack

285332

Lippert Components 30-inch lift stabilizer jacks provide a cost-efficient way to stabilize your RV or trailer. LCI manual stabilizer jacks feature easy bolt-on installation and powder-coated, rust-inhibitive finish. This single stabilizer jack comes with mounting hardware.

  • Heavy gauge steel stabilizer jacks manually raise and lower with crank handle and add stability to RV fifth-wheel or travel trailer
  • 30″ rise
  • Easy bolt-on installation
  • Mounting hardware included

30″ Scissor Jack Kit with Crank Handle (Pair)

$101.95

30″ Scissor Jack Kit – 2 Pack

285344

Lippert Components 30-inch lift stabilizer jacks provide a cost-efficient way to stabilize your RV or trailer. LCI manual stabilizer jacks feature easy bolt-on installation and powder-coated, rust-inhibitive finish. This kit contains two 30-inch stabilizer jacks, mounting hardware and manual crank handle.

  • Heavy gauge steel stabilizer jacks manually raise and lower with crank handle and provide added stability to RV fifth-wheel or travel trailer
  • 30″ rise
  • Easy bolt-on installation
  • Mounting hardware included

9″ Round Foot Pads for Landing Gear Jacks (2-Pack)

$101.95

Landing Gear Foot Pad 9″ Round

314667

Increase your footprint for added stability with a pair of these 9-inch diameter landing gear foot pads. These replace rectangular fifth-wheel RV landing gear foot pads that come standard with most power landing gear systems.

  • Large, 9-inch diameter foot pad is an upgrade to standard landing gear foot pads
  • Round, 9-inch diameter foot pad adds to front landing gear/front jacks footprint
  • 9″ diameter
  • 2 foot pads per package
  • Easy do-it-yourself installation

Aluminum Gear Box for Universal Mount Landing Gear

$34.95

Aluminum Gear Box For Universal Mount Landing Gear

276602

Lippert Components Power Landing Gear is standard on most fifth-wheel RVs produced today. This replacement Gear Box will get you back to camping and enjoying the great features of your power landing gear. The replacement Power Landing Gear Box is easy to install with minimal assembly required.

  • Replacement Power Landing Gear Box for fifth-wheel RVs
  • For use on LCI Power Landing Gear assemblies
  • Easy to install
  • Minimal assembly required

Chassis 1-1/4″ Swing Bolt Kit

$23.95

1-1/4″ Swing Bolt Kit – JT’s Strong Arm™ Jack Stabilizer

314595

This replacement bolt kit for your JT’s Strong Arm Jack Stabilizers comes with 1-1/4″ swing bolts that are used on front and read jacks to attach each JT’s Strong Arm stabilizer bar.

  • Replacement swing bolt kit for frame mounting
  • 2 swing bolts, 4 washers and 2 nuts per package
  • Easy do-it-yourself installation
  • For use only with JT’s Strong Arm Jack Stabilizers

Control Box Auto Lev

$579.86

Power Gear 359077 Auto Level Control Box,1 Pack

359077

  • Replacement Auto level control box
  • Power gear Number: 140-1229
  • For use in power gear Hydraulic Leveling systems

Crank Handle for Stabilizer Jack

$22.42

Manual Crank Handle – Various Applications

285324

This durable Manual Scissor Jack Crank Handle is easy to use and is also used for our smart and power tongue jacks for manual override

Cross Shaft Kit – Universal Landing Gear

$33.95

Cross Shaft Kit – Universal Landing Gear

334096

This replacement Universal Landing Gear Cross Shaft connects the two landing gear legs and will get you back to camping and enjoying the great features of your Power Landing Gear.

  • Kit includes one 1″x1″ cross shaft tube and one 3/4″ and 3/4″ cross shaft tube
  • For use on LCI power landing gear assemblies
  • Easy to install
  • Minimal assembly required

 

Electric stabalizer jack motor (klauber)

$305.95

Electric Stabilizer Jack Replacement Motor

138445

  • Replacement motor for Lippert Components standard and ultra-light rear or front electric stabilizer jacks
  • Imported
  • Manufactured by Klauber for Lippert Components
  • Manufacturer model number C-300

Electric Stabilizer Jack Motor

$316.20

Rear Electric RV Stabilizer Smart Jack Motor

352338

  • Replacement motor for LCI rear electric stabilizer jack
  • Now 2x faster
  • Comes in black finish
  • Electric stabilizer jacks save time and energy when setting up and tearing down your campsite

Electric Stabilizer Jack Support Arm (Black)

$24.95

Black Support Arm – Power Stabilizer

1134121

Durable and affordable describe the Lippert Components Power Stabilizer Jack Support Arm. This replacement arm will get you back to camping and enjoying all the great features you have come to love on your Power Stabilizer Jacks. Spend less time setting up camp and more time enjoying your vacation.

  • Constructed from heavy gauge steel
  • Powder coat finish stands up to the elements
  • Comes in black finish

Electric Stabilizer Jack Support Arm (Yellow)

$24.95

Yellow Support Arm – Power Stabilize

1134122

After a long trip, cranking manual scissor jacks can be a long and strenuous process. LCI’s Power Stabilizer Jacks easily retract and extend with the flip of a switch. In just a few minutes, the coach will be stable, so you can spend less time setting up camp and more time enjoying your vacation. LCI Power Stabilizer Jacks are an affordable way to upgrade to power stabilization and easily bolt-on to the existing frame.

  • Constructed from heavy gauge steel
  • Powder coat finish stands up to the elements
  • Comes in yellow finish

Electric Stabilizer Jack with Black Waterproof Switch

$400.81

High Speed Power Stabilizer – Black Waterproof Switch Kit

298707

After a long trip, cranking manual scissor jacks can be a long and strenuous process. LCI’s Power Stabilizer easily retract and extend with the flip of a switch. In just a few minutes, the coach will be stable without having to break a sweat! Spend less time setting up camp and more time enjoying your vacation. LCI Power Stabilizer are an affordable way to upgrade to power leveling and easily bolt-on to your existing frame.

 

Electric Tongue Jack (Black) 3500#

$179.97

3500LB Power Tongue Jack Black

285318

  • Electric leveling with just the push of a button
  • 3,500-pound rating
  • 30 AMP, 18” Stroke. Bracket height : Retracted: 10.75 Inch. Extended : 28.75 Inch
  • Textured casing helps protect from chips and cracks
  • 4 LED lights provide excellent illumination
  • Helical cut gears reduce noise and improve operating efficiency
  • Kit includes mounting hardware, pins and manual crank handle

Ground Control 3.0 Electric Leveling System; 4-Point

$2,499.00

Ground Control® 3.0 Aftermarket Kit – 4-Point With Wireless Remote

358590

  • Easy bolt-on installation
  • Wireless remote controls system from anywhere
  • 12V electric powered, easy setup/installation, one touch automatic leveling
  • 20,000 pounds total systems capacity
  • More than four times faster than the competition

Ground Control TT Electric Leveling System

$2.00

GROUND CONTROL TT KIT 

672136

Ground Control® TT levels and stabilizes your travel trailer quickly and accurately. It’s a long and difficult process to get an RV level with manual jacks, chocks and wedges. Ground Control TT levels and stabilizes the travel trailer in a matter of minutes.

Heavy Duty Landing Gear Motor; 6500# (Tuson)

$279.87

Tuson Fifth Wheel Landing Gear Motor HD 6500 LB

196308

  • Heavy duty 6500-pound rated Tuson landing gear motor for fifth-wheel RVs
  • Motor only no other parts included
  • For use on LCI power landing gear assemblies
  • Easy to install
  • No assembly required

High Speed Landing Gear Motor (Tuson)

$271.41

High-Speed Landing Gear Motor (Tuson)

141893

Lippert Components Power Landing Gear is standard on most fifth-wheel RVs produced today. This high speed Tuson Landing Gear Motor will allow you to quickly extend and retract your fifth-wheel RV’s landing gear, leaving you more time for the fun stuff while camping. This motor is easy to install and requires no assembly.

  • High speed Tuson Landing Gear Motor for fifth-wheel RVs
  • Motor only; no other parts included
  • For use on LCI Power Landing Gear assemblies
  • Easy to install
  • No assembly required

Hyd Leveling Jack

$899.95

Power Gear 359384/500800 Leveling Jack – 13,000 LB

359384

Power Gear Hydraulic Leveling System for Leveling Jack Assembly for Anchor Spring Bottom (500800)

Hydraulic Jack Pad Adaptor Lugs (2/Pkg)

$34.82

Adapter Lug For Hydraulic Jack Pads – JT’s Strong Arm™ Jack Stabilizer

314592

These Adapter Lugs make it possible to attach JT’s Strong™ Arm Jack Stabilizers to round hydraulic foot pads popular on many fifth-wheel RV models. There are two weld-on lugs per package. Bolt-on or weld-on application (bolts included).

  • Hydraulic fifth-wheel landing gear foot lug on adaptor kit to attach JT’s Strong Arm Jack Stabilizers
  • Kit designed for RV fifth-wheel owners who want to attach JT’s Strong Arm Jack Stabilizers to fifth-wheel landing gear legs with round foot pads, typically found on hydraulic landing gear and Ground Control Electric Leveling Systems
  • 2 adaptor lugs per package
  • Weld-on application
  • For use only with JT’s Strong Arm Jack Stabilizers

 

Jack Leg 4″ Swing Bolt Kit

$34.46

JT’s Strong Arm Stabilizer 4″ Swing Bolt Kit

314596

  • 4″ swing bolt replacement kit for jack (front and rear) mounting JT’s Strong Arm Jack Stabilizers
  • Replacement swing bolt kit can be used to mount each JT’s Strong Arm Stabilizer bar to front and rear jack
  • 2 swing bolts, 4 nuts, 4 washers and 4 adaptors per package
  • Easy do-it-yourself installation
  • For use only with JT’s Strong Arm Jack Stabilizers

Jt Strongarm Jack Stabilizer Kit, 5Th Wheel, Over 58″

$336.95

Standard Fifth-Wheel Kit – JT’s Strong Arm™ Jack Stabilizer

191023

Like a rock-solid race car chassis, JT’s Strong Arm Jack Stabilizers use triangles — the strongest shape in nature — to eliminate unwanted chassis movement. One end of each stabilizer tube attaches to each landing gear leg and the other to the RV frame, forming a rigid triangle. There is no welding required and no need to remove and reattach during setup. It’s permanent! When parked, JT’s Strong Arm Jack Stabilizers telescope into place with the jacks.

The patented universal system is designed to attach to the three main types of jacks found on RVs: scissor, front landing gear and telescoping.

*Additional hardware may be required.

Jt Strongarm Jack Stabilizer Kit, 5Th Wheel, Under 58″

$336.95

JT’s Strong Arm™ Jack Stabilizer Kit – Various Sizes

191024

Like a rock-solid race car chassis, JT’s Strong Arm Jack Stabilizers use triangles — the strongest shape in nature — to eliminate unwanted chassis movement. One end of each stabilizer tube attaches to each landing gear leg and the other to the RV frame, forming a rigid triangle. There is no welding required and no need to remove and reattach during setup. It’s permanent! When parked, JT’s Strong Arm Jack Stabilizers telescope into place with the jacks.

The patented universal system is designed to attach to the three main types of jacks found on RVs: scissor, front landing gear and telescoping.

*Additional hardware may be required.

Jt Strongarm Jack Stabilizer Kit, Travel Trailer

$336.95

 JT’s Strong Arm Travel Trailer Stabilizer Kit

191025

Like a rock-solid race car chassis, JT’s Strong Arm Jack Stabilizers use triangles — the strongest shape in nature — to eliminate unwanted chassis movement. One end of each stabilizer tube attaches to each landing gear leg and the other to the RV frame, forming a rigid triangle. There is no welding required and no need to remove and reattach during setup. It’s permanent! When parked, JT’s Strong Arm Jack Stabilizers telescope into place with the jacks.

The patented universal system is designed to attach to the three main types of jacks found on RVs: scissor, front landing gear and telescoping.

*Additional hardware may be required.

Landing Gear Leg Repair Kit – Follow Leg

$36.95

Venture Follow Leg Fifth Wheel Landing Gear Repair Kit

146060

  • Follow leg landing gear repair kit for fifth-wheel RVs
  • Kit includes 1 follow drive shaft (913-01) 2 drive shaft bushings (908-00) 1 e-clip (919-00) 1 drive pin (920-00) 1 spiral pin (1020-08) 1 12t bevel gear (909-00) 1 16t bevel gear (910-00) 1 shim washer (907-00) and 1 thrust washer (904-00)
  • For use on LCI power landing gear assemblies
  • Easy to install

Landing Gear Leg Repair Kit – Lead Leg

$26.62

Venture Lead Landing Gear Leg Repair Kit

146059

  • Lead leg power landing gear repair kit for fifth-wheel RVs
  • Kit includes 1 lead drive shaft (913-01) 2 drive shaft bushings (908-00) 1 e-clip (919-00) 1 drive pin (920-00) 1 spiral pin (1020-08) 1 12t bevel gear (909-00) 1 16t bevel gear (910-00) 1 shim washer (907-00) and 1 thrust washer (904-00)
  • For use on LCI power landing gear assemblies
  • No assembly required

Landing Gear Legs Saddle Bracket (Weld-On)

$21.84

Saddle Bracket (Weld-On) – Landing Gear Legs

113511

  • Replacement standard weld-on landing gear leg bracket for fifth-wheel RVs
  • Leg bracket only no other parts included
  • For use on LCI power landing gear assemblies
  • Weld-On application
  • No assembly required

Landing Gear Standard Footpad Kit

$25.95

Standard Footpad Kit Landing Gear,1 Pack

700052

  • Standard fifth-wheel landing gear foot pad
  • Constructed with durable steel
  • Will fit all Lippert Components fifth wheel landing gear jacks

LCI Electric Stabilizer Food Pad Adaptor Kit (4/Pkg)

$29.95

JT’s Strong Arm Stabilizer Electric Jack Adaptor Kit

314597

  • Specially-designed pads attach JT’s Strong Arm Jack Stabilizer to Lippert Components Electric Stabilizer Jack pads
  • Pads attach to electric stabilizer jack foot pads
  • Holes designed to attach to JT’s Strong Arm Jack Stabilizers
  • 4 jack pads per package
  • Easy do-it-yourself installation

Manual crank handle

$27.00

Jack & Landing Gear Pads & Parts

119226

  • Standard fifth-wheel crank handle for manual operation
  • Standard for all Lippert Components fifth-wheel landing gear/front jacks

Quick Release 5Th Wheel Pull Pins (2/Pkg)

$34.48

Quick Release Pull Pin for Fifth Wheel Landing Gear

308287

  • The Mobile Outfitters Quick Release Pull Pins for Fifth Wheel Landing Gear
  • Easily adjust your height with the heavy duty pull pins
  • Hook-up and un-hook much faster
  • Bolt on, no loose hardware or pins to lose
  • Zinc plated, no rust coating 3/8 inch pin diameter for your 1,25 inch square leg landing gear with 7/16 inch holes Two per package